What Matters Should Be Paid Attention To Before The Biomass Pellet Machine Is Debugged
First of all to understand the biomass pellet machine feed performance and operating process.
2. The operation of the specific equipment of pellet machine should be checked before commissioning.
3. Understand the crushing granularity of the grinder which is matched with the mould hole of the granule machine, the size of raw materials should be fine, but not meticulous, the best coarse, medium and fine, it is recommended that the ideal size distribution is as follows: Above the granularity of ≤1%;2.0mm above the granularity of more than ≤5%;1.0mm particle size of about 20%; 0. 5mm above the granularity of about 30%, 0.25mm below the granularity of less than 20%;0.25mm than the size of about 24%.
For any further questions ,pls contact us :