Before the production of sawdust granulator, it is necessary to check the operation of the equipment, to see whether the sawdust granulator has the appearance of screw loosening, whether the transmission parts are sensitive, etc. After the use of the equipment is light, to ensure that the machine does not start any abnormal motor, adjust the working speed. For material handling, the moisture content of wood material is less than fifteen percent.
Before entering the sawdust granulator, check the degree of drying and wetting, pay attention to the environment of transportation and storage, material moisture is too big will stick to the inside of the sawdust granulator, easy to cluster in the air selection, will reduce the output value of the sawdust granulator, when there is water, the material should be spread out and exposed to the sun, after drying and disposal, grind fine. The vulnerable parts of the sawdust granulator have a service cycle. It needs to be replaced for a period of time. The better the wear resistance of the grinding parts of the sawdust granulator is, the greater the production capacity of the sawdust granulator is. No wear resistance will affect the production capacity. The wind timing of sawdust particles is affected by voltage fluctuation.
After the sawdust granulator works properly, it prevents the wood from entering the machine with metal, brick and stone numbers; after all the materials and machines work without doubt, it starts feeding, and when feeding, it should feed evenly and steadily, so that the power can be brought into play, and together it also prevents the appearance of stuffing. As for the smoothness of the equipment, it is necessary to mark the smooth refueling time according to the processing frequency, so as to make the products have longer life and very good processing and production. Usually, the main grinding bearing is added with lithium molybdenum disulfide grease once every 12 hours. There are 8 oil injection points in the sawdust granulator.
Sawdust fineness can be adjusted according to the position of the regulating valve, and the product fineness should be checked in time. The amount of wood flour in the fine grinding material of sawdust granulator will affect the milling, adhesion will affect the loosening, wood flour should be screened earlier, too large particles will also affect the output value. Wood sawdust granulator can produce the main materials such as wood, pine, miscellaneous wood, lifting wood, Chinese fir, raw bamboo, bamboo, and can also be used for straw, straw, corn straw, sorghum straw and other fibre stalk-like materials.
In the production and application of sawdust granulator, chipper and wood destroyer, the vulnerable parts have a period of operation. When they are used for a period of time, the better the wear resistance of the grinding parts of sawdust granulator is, the greater the production capacity of sawdust granulator is. No wear resistance will affect the production capacity. The wind timing of sawdust particles is affected by voltage fluctuation.