Wood briquette press
What is wood briquette press used for ?
To press biomass material such as forest waste :wood log ,various kinds of hard and soft wood as well as agriculture waste .
1. Overturn -design in Roller-Bearing of traditional pellet mill .
No-bearing and no eccentric shaft in roller assembly, so it avoid bearing usage in high temperature pelletizing area and thereby avoiding adding grease intermittently.The seal of roller assembly is not in one-piece (one-piece model needs to replace roller assembly timely and the cost will increase accordingly ), and bearing is not taken out to be lubricated (extra cooling device is needed and the cost will increase accordingly too ),what we do is to integrate it in gear box and lubricated by gear oil .
2. Working 24-hour continuously
If improper operation happens , for example , foreign matters like steel balls ,iron bars ,stones result in malfunction ,it only harm ring die and roller ,but on any harm to driven parts of machines , but at the same time we need pay attention to the pre-process of materials like sieving and iron-removal to avoid the unnecessary foreign matters entering with normal materials . Labor-cost saving , and one worker can finish all pelletizing process .
3. Compared with traditional wood briquette press ,2 times larger of pressing chamber .
Technical parameter :
Diameter of ring die：
Structure in press：
Double roller（no bearing）
Lock way of roller adjustment：
Operating temperature in chamber：
Lubricated grease ：
Ring die cooling way：
（ Φ6~10mm）：2.5-3t/h （according to different material）
No limited（wearing part is excluded）